Fibre Reinforced is a new generation, water-based acrylic elastic long-life waterproof sealer for rooms, window ledges and parapet walls. This product is high quality and gives a 10year warranty
APPLICATION AREAS
- Interior and exterior use
- Cement tiles (new or weathered), fibre cement sheeting (new or weathered)
- Primed plaster
- Previously painted substrates
- Primed metal and wooden substrates
- Flat cement/concrete roofs and walls
- Nail heads and roofing bolts and roof tile ridges
PRODUCT FEATURES
- Fibre Reinforced is a fibre filled coating material designed to prevent water penetration into the substrate. Applied in several layers it forms a thick protective waterproof skin
- Available in several popular roof shades as well as white
- This product contains fibrous particles combined with a flexible water-resistant acrylic polymer emulsion
- Applied to specification it seals masonry substrates and prevents water penetration
- Fibre Reinforced remains highly flexible for years, even after extended exposure to the environment.
- Suitable for concrete and tiled roofs, galvanised sheeting, roofing felt and fibre cement, exposed bricks and cement building blocks
- Ideal for repair work on roofs, sealing nail heads, leaking flashings, cracked roof tiles and roof ridging repairing damaged or cracked roofing felt.
- Seals window ledges and parapet wall tops
- Highly durable and UV resistant
- Waterproof
- Excellent long term flexibility
- Excellent adhesion
- Easy no-mess application properties
- Quick drying – 2 coats can be applied in 1 day
- Low odour
- 2 Coats of Fibre Reinforced are used for best results
- In white and pastel colours, it also has the added benefit of reflecting heat and therefore contributes to heat reduction (especially for metal roofs)
- Acid resistant
APPLICATION DETAILS
Mixing: Always stir well with a flat paddle before use
Application Method: Brush, roller or trowel
Thinning: This product is ready for use undiluted; thinning with water will reduce its hiding power
Cleaning: Clean equipment with water.
Application:
For Brush or Roller Application:
- Apply a generous thick, coat of Fibre Reinforced to the area that needs protecting in small manageable sections
- Allow to dry 6hours before re-coating
- Apply a second, third and possibly a fourth generous coat, waiting 4-6 hours between coats, until the membrane is totally saturated and the surface has an even and very noticeable high sheen.
- This product is ready for use undiluted; thinning with water will reduce its hiding power and effectiveness
- Three to four coats of this product are used for best results
- Application equipment clean-up with clean tap water
- Do not apply after 16:00 in the winter
- Do not apply exterior if it looks like rain will occur, within 4-6hours of application
- 100µ 1 Coat – recommended 300µ recommended
SURFACE PREPARATION
Rusted Metal
- Remove all rust with Clean & Protect, scrub and rinse thoroughly with water
- Remove dust, oil, grease and other foreign materials with Degreaser
- Ensure that the surface is sound and dry before painting
- Apply paint – 3 coats with 4-6 hours drying time between coats
New Metal
- De-grease surfaces with HD Degreaser to remove the manufacturer’s grease protective layer. This process is repeated until the surface is water break free.
- Rinse thoroughly with water
- Prime the clean de-greased metal with a water-based metal primer
- Apply paint – 3 coats with 4-6 hours drying time between coats
Uncoated Cement Plaster Surfaces
- Remove dust, foreign material, fungal and algae growth
- Fill all visible crack and spot primer with plaster primer
- Apply paint – 3 coats with 4-6 hours drying time between coats
Fibre Cement Surfaces (Uncoated/Weathered/new)
- Remove dust, foreign material, fungal and algae growth
- If friable or powdery, seal with bonding liquid or plaster primer
- Apply paint – 3 coats with 4-6 hours drying time between coats
Previously Painted Surfaces
- Make sure old paint coatings are firm and solid
- Remove all loose, flaking and bubbling paint with Paint Stripper, scrub thoroughly with hard wire brush or broom and rinse off with water
- Remove all dust, grease, foreign material, fungal and algae growth with Dynamite Degreaser or HD Degreaser for tough grease and oil stains
- Wash thoroughly with water and allow to dry
- If then powdery or friable, seal with bonding liquid or plaster primer
- Apply paint – 3 coats with 4-6 hours drying time between coats
Reviews
There are no reviews yet.