YEKA All Purpose Waterproofing Rubber Terracotta

This waterborne coating is a highly flexible pure acrylic coating, developed as a water resistant non yellowing coating with rust inhibiting properties and can be applied to virtually all surfaces. The product has a fine particle size with medium viscosity and shows outstanding ultraviolet tolerance. This product can be used as a base coat and a topcoat. Can be used with membrane; woven or spun.

APPLICATION AREAS

• Interior and exterior use
• Galvanised and cement surfaces

PRODUCT FEATURES

• Highly flexible pure acrylic coating
• Water resistant
• Non-yellowing
  Excellent adhesion
• UV Resistant
  Easy no-mess application properties
• Quick drying – 2 coats can be applied in one day
• Can be used as a base and topcoat
  Rust Inhibitor
• Can be used with membrane – spun or woven

APPLICATION DETAILS

• Apply 3 coats of paint to achieve proper penetration and allow to dry for 3hours, and an additional 4 hours in cold wet weather
• Porous surfaces may require an additional coat to ensure surface is properly coated

For Airless Spray Gun Application:

• Dilute the primer with no more than 10% by volume with water
• Apply 3 coats of paint to achieve proper penetration and allow to dry for 3 hours and an additional 4 hours in cold weather
• Porous surfaces may require an additional coat to ensure surface is properly coated

SURFACE PREPARATION:

Steel & Galvanised Structures:

• Remove all rust with Clean & Protect, scrub and rinse thoroughly with water
• Remove dust, oil, grease and other foreign materials with Degreaser
• Ensure that the surface is sound and dry before painting
• Apply paint – 3 coats with 3 hours drying time between coats

Previously Painted Surfaces:

• Make sure old paint coatings are firm and solid.
• Remove all loose, flaking and bubbling paint with Paint Stripper, and rinse thoroughly with water
• Treat rusted areas with Clean & Protect by means of wire brush, hard bristle brush or broom. Wash with water.
• Remove dust, oil, grease and other foreign materials with Degreaser, rinse thoroughly and allow to dry
• Ensure that the surface is sound and dry before painting
• Apply primer and leave to dry
• Apply paint – 3 coats with 3hours drying time between coats

• Remove all dust, dirt and loose granules, friable and powdery material with high-pressure water jet or scrub down with Degreaser and a hard bristle or wire brush and water
• Prime with one coat bonding liquid – allow to dry for 2 hours
• Apply paint – 3 coats with 3 hours drying time between coats